using Autodesk.Revit.DB;
using KDCS.Utils;
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;

namespace KMBIM
{
    public partial class Form_settings : System.Windows.Forms.Form
    {
        public Document m_doc;
        public Form_settings()
        {
            InitializeComponent();
        }

        private void settings_Load(object sender, EventArgs e)
        {
            this.KeyPreview = true;

            //소방은 옵션이 없어 숨김
            btn_Fire.Hide();

            //유틸리티/////////////////////////////////////////////////
            Util_Setting();
            //배관/////////////////////////////////////////////////////
            Pipe_Setting();
            //설치/////////////////////////////////////////////////////
            Install_Setting();
            //편집/////////////////////////////////////////////////////
            Edit_Setting();
            //단열 슬리브//////////////////////////////////////////////
            Sleeve_Setting();
            //문서화//////////////////////////////////////////////
            Document_Setting();
            //덕트//////////////////////////////////////////////
            Duct_Setting();
        }

        //유틸리티 
        private void Util_Setting()
        {
            //--------------------------------------------------------------------------------------------//
            //*******간섭회피********
            //여유공간 높이
            if (Reg.getReg("Avoid_Height") != "" || Reg.getReg("Avoid_Height") != string.Empty)
            {
                double hgt = Convert.ToDouble(Reg.getReg("Avoid_Height"));
                Setting_numericUpDownFreeSpaceHeight.Value = (decimal)hgt;
            }

            //각도
            if (Reg.getReg("Avoid_Angle") != "" || Reg.getReg("Avoid_Angle") != string.Empty)
            {
                double ang = Convert.ToInt32(Reg.getReg("Avoid_Angle"));
                Setting_numericUpDownAngle.Value = (decimal)ang;
            }

        }

        //배관
        private void Pipe_Setting()
        {
            //--------------------------------------------------------------------------------------------//
            //*******간격조정********
            //간격 입력
            if (Reg.getReg("Interval_Offset") != "" || Reg.getReg("Interval_Offset") != string.Empty)
            {
                txt_IntervalDist.Text = Reg.getReg("Interval_Offset");
            }
            else
            {
                //기본값 150
                txt_IntervalDist.Text = "150";
            }

            //--------------------------------------------------------------------------------------------//
            //*******한본********
            //절단 길이
            if (Reg.getReg("Trim_Pipe_Length") != "" || Reg.getReg("Trim_Pipe_Length") != string.Empty)
            {
                txt_cuttingDIst.Text = Reg.getReg("Trim_Pipe_Length");
            }
            else
            {
                //기본값 150
                txt_cuttingDIst.Text = "6";
            }


        }

        //설치
        private void Install_Setting()
        {
            //--------------------------------------------------------------------------------------------//
            //*******하단가대********
            //가대 말단 거리
            if (Reg.getReg("Rack_MarginDist") != "" || Reg.getReg("Rack_MarginDist") != string.Empty)
            {
                txt_RackMarginDist.Text = Reg.getReg("Rack_MarginDist");
            }
            else
            {
                //가대 말단 거리 기본값 200
                txt_RackMarginDist.Text = "200";
            }

            //--------------------------------------------------------------------------------------------//
            //*******행거********
            //행거 간격
            if (Reg.getReg("textBoxHangerSpacing") != "" || Reg.getReg("textBoxHangerSpacing") != string.Empty)
                txt_HangerDist.Text = Reg.getReg("textBoxHangerSpacing");
            else
            {
                //행거 간격 기본값 500
                txt_HangerDist.Text = "500";
            }

            //조인트로부터 거리
            if (Reg.getReg("textBoxDistanceFromJoint") != "" || Reg.getReg("textBoxDistanceFromJoint") != string.Empty)
                txt_JointDist.Text = Reg.getReg("textBoxDistanceFromJoint");
            else
            {
                //행거 조인트로부터 거리 기본값 300
                txt_JointDist.Text = "300";
            }

        }

        //편집
        private void Edit_Setting()
        {
            //--------------------------------------------------------------------------------------------//
            //*******부품간격********
            //거리
            if (Reg.getReg("PartSpacing_Dist") != "" || Reg.getReg("PartSpacing_Dist") != string.Empty)
            {
                txt_partsDist.Text = Reg.getReg("PartSpacing_Dist");
            }
            else
            {
                //부품간격 거리 기본값 100
                txt_partsDist.Text = "100";
            }

        }

        //단열 슬리브
        private void Sleeve_Setting()
        {
            //--------------------------------------------------------------------------------------------//
            //*******슬리브********
            //배관 여유 공간
            if (Reg.getReg("Sleeve_PipeOffset") != "" || Reg.getReg("Sleeve_PipeOffset") != string.Empty)
            {
                txt_SleevePipeFreeSpace.Text = Reg.getReg("Sleeve_PipeOffset");
            }
            else
            {
                //배관 여유 공간 기본값 50
                txt_SleevePipeFreeSpace.Text = "50";
            }

            //덕트 여유 공간
            if (Reg.getReg("Sleeve_DuctOffset") != "" || Reg.getReg("Sleeve_DuctOffset") != string.Empty)
            {
                txt_SleeveDuctFreeSpace.Text = Reg.getReg("Sleeve_DuctOffset");
            }
            else
            {
                //덕트 여유 공간 기본값 50
                txt_SleeveDuctFreeSpace.Text = "50";
            }

        }

        //문서화
        private void Document_Setting()
        {
            //--------------------------------------------------------------------------------------------//
            //*******일괄치수********
            //수직 간격
            if (Reg.getReg("Tag_VirticalDist") != "" || Reg.getReg("Tag_VirticalDist") != string.Empty)
            {
                txt_MtagVertical.Text = Reg.getReg("Tag_VirticalDist");
            }
            else
            {
                //수직 간격 기본값 500
                txt_MtagVertical.Text = "500";
            }

            //수평 간격
            if (Reg.getReg("Tag_HorizontalDist") != "" || Reg.getReg("Tag_HorizontalDist") != string.Empty)
            {
                txt_MtagHorizontal.Text = Reg.getReg("Tag_HorizontalDist");
            }
            else
            {
                //수평 간격 기본값 700
                txt_MtagHorizontal.Text = "500";
            }
        }

        //덕트
        private void Duct_Setting()
        {
            //--------------------------------------------------------------------------------------------//
            //*******플랜지********
            //절단 길이
            if (Reg.getReg("Trim_Duct_Length") != "" || Reg.getReg("Trim_Duct_Length") != string.Empty)
            {
                txt_FlangeCutDist.Text = Reg.getReg("Trim_Duct_Length");
            }
            else
            {
                //절단 길이 기본값 1740
                txt_FlangeCutDist.Text = "1740";
            }
        }

        //--------------------------------------------------------------------------------------------//
        //*******유틸리티********
        //간섭회피 여유공간 높이
        private void Setting_numericUpDownFreeSpaceHeight_ValueChanged(object sender, EventArgs e)
        {
            Reg.setReg("Avoid_Height", Setting_numericUpDownFreeSpaceHeight.Value.ToString());
        }
        //간섭회피 각도
        private void Setting_numericUpDownAngle_ValueChanged(object sender, EventArgs e)
        {
            Reg.setReg("Avoid_Angle", Setting_numericUpDownAngle.Value.ToString());
        }

        //--------------------------------------------------------------------------------------------//
        //*******배관********
        //간격조정 간격 입력
        private void txt_IntervalDist_TextChanged(object sender, EventArgs e)
        {
            if (txt_IntervalDist.Text == "") return;
            if (txt_IntervalDist.Text != "-")
            {
                Reg.setReg("Interval_Offset", txt_IntervalDist.Text.ToString());
            }

        }
        //한본 절단길이
        private void txt_cuttingDIst_TextChanged(object sender, EventArgs e)
        {
            if (txt_cuttingDIst.Text == "") return;
            if (txt_cuttingDIst.Text != "-")
            {
                Reg.setReg("Trim_Pipe_Length", txt_cuttingDIst.Text.ToString());
            }
        }
        //--------------------------------------------------------------------------------------------//
        //*******설치********
        //하단가대 가대 말단 거리
        private void txt_RackMarginDist_TextChanged(object sender, EventArgs e)
        {
            if (txt_RackMarginDist.Text == "") return;
            if (txt_RackMarginDist.Text != "-")
            {
                Reg.setReg("Rack_MarginDist", txt_RackMarginDist.Text.ToString());
            }
        }

        //행거 행거 간격
        private void txt_HangerDist_TextChanged(object sender, EventArgs e)
        {
            if (txt_HangerDist.Text == "") return;
            if (txt_HangerDist.Text != "-")
                Reg.setReg("textBoxHangerSpacing", txt_HangerDist.Text);

        }

        //행거 조인트로부터 거리
        private void txt_JointDist_TextChanged(object sender, EventArgs e)
        {
            if (txt_JointDist.Text == "") return;
            if (txt_JointDist.Text != "-")
                Reg.setReg("textBoxDistanceFromJoint", txt_JointDist.Text);
        }

        //--------------------------------------------------------------------------------------------//
        //*******편집********
        //부품간격 거리
        private void txt_partsDist_TextChanged(object sender, EventArgs e)
        {
            if (txt_partsDist.Text == "") return;
            if (txt_partsDist.Text != "-")
                Reg.setReg("PartSpacing_Dist", txt_partsDist.Text);
        }

        //--------------------------------------------------------------------------------------------//
        //*******단열슬리브********
        //슬리브 배관여유공간
        private void txt_SleevePipeFreeSpace_TextChanged(object sender, EventArgs e)
        {
            if (txt_SleevePipeFreeSpace.Text == "") return;
            if (txt_SleevePipeFreeSpace.Text != "-")
                Reg.setReg("Sleeve_PipeOffset", txt_SleevePipeFreeSpace.Text);
        }
        //슬리브 덕트여유공간
        private void txt_SleeveDuctFreeSpace_TextChanged(object sender, EventArgs e)
        {
            if (txt_SleeveDuctFreeSpace.Text == "") return;
            if (txt_SleeveDuctFreeSpace.Text != "-")
                Reg.setReg("Sleeve_DuctOffset", txt_SleeveDuctFreeSpace.Text);
        }

        //--------------------------------------------------------------------------------------------//
        //*******문서화********
        //일괄치수 수직간격        
        private void txt_MtagVertical_TextChanged(object sender, EventArgs e)
        {
            if (txt_MtagVertical.Text == "") return;
            if (txt_MtagVertical.Text != "-")
            {
                Reg.setReg("Tag_VirticalDist", txt_MtagVertical.Text);
            }
        }
        //일괄치수 수평간격
        private void txt_MtagHorizontal_TextChanged(object sender, EventArgs e)
        {
            if (txt_MtagHorizontal.Text == "") return;
            if (txt_MtagHorizontal.Text != "-")
            {
                Reg.setReg("Tag_HorizontalDist", txt_MtagHorizontal.Text);
            }
        }

        //--------------------------------------------------------------------------------------------//
        //*******덕트********
        //플랜지 절단길이
        private void txt_FlangeCutDist_TextChanged(object sender, EventArgs e)
        {
            if (txt_FlangeCutDist.Text == "") return;
            if (txt_FlangeCutDist.Text != "-")
            {
                Reg.setReg("Trim_Duct_Length", txt_FlangeCutDist.Text);
            }
        }

        private void btn_Util_Click(object sender, EventArgs e)
        {
            tabSettings.SelectedIndex = 0;
        }

        private void btn_Pipe_Click(object sender, EventArgs e)
        {
            tabSettings.SelectedIndex = 1;
        }

        private void btn_Install_Click(object sender, EventArgs e)
        {
            tabSettings.SelectedIndex = 2;
        }

        private void btn_Edit_Click(object sender, EventArgs e)
        {
            tabSettings.SelectedIndex = 3;
        }

        private void btn_Fire_Click(object sender, EventArgs e)
        {
            tabSettings.SelectedIndex = 4;
        }

        private void btn_Sleeve_Click(object sender, EventArgs e)
        {
            tabSettings.SelectedIndex = 5;
        }

        private void btn_Document_Click(object sender, EventArgs e)
        {
            tabSettings.SelectedIndex = 6;
        }
        private void btn_Duct_Click(object sender, EventArgs e)
        {
            tabSettings.SelectedIndex = 7;
        }

        private void Form_settings_KeyDown(object sender, KeyEventArgs e)
        {
            if (e.KeyCode == Keys.Escape)
            {
                this.DialogResult = DialogResult.Cancel;
            }
            else if (e.KeyCode == Keys.Enter)
            {
                this.DialogResult = DialogResult.OK;
            }
        }



        #region 텍스트박스 숫자,'.','-'만 넣는 이벤트
        private void Setting_numericUpDownFreeSpaceHeight_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

        }
                
        private void Setting_numericUpDownAngle_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;
        }
        
        private void txt_IntervalDist_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_IntervalDist.Text) || txt_IntervalDist.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_cuttingDIst_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_cuttingDIst.Text) || txt_cuttingDIst.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_RackMarginDist_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_RackMarginDist.Text) || txt_RackMarginDist.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_HangerDist_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_HangerDist.Text) || txt_HangerDist.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_JointDist_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_JointDist.Text) || txt_JointDist.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_partsDist_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_partsDist.Text) || txt_partsDist.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_SleevePipeFreeSpace_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_SleevePipeFreeSpace.Text) || txt_SleevePipeFreeSpace.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_SleeveDuctFreeSpace_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_SleeveDuctFreeSpace.Text) || txt_SleeveDuctFreeSpace.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_MtagVertical_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_MtagVertical.Text) || txt_MtagVertical.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_MtagHorizontal_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_MtagHorizontal.Text) || txt_MtagHorizontal.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }

        private void txt_FlangeCutDist_KeyPress(object sender, KeyPressEventArgs e)
        {
            int keyCode = (int)e.KeyChar;
            if ((keyCode < 48 || keyCode > 57) && keyCode != 8 && keyCode != 46)
                e.Handled = true;

            if (keyCode == 46)
            {
                if (string.IsNullOrEmpty(txt_FlangeCutDist.Text) || txt_FlangeCutDist.Text.Contains('.') == true)
                    e.Handled = true;
            }
        }
        #endregion
    }
}